Sale!

Three210 V2 FPV Racing Drone

£120.59£348.07

Cheap RC Quadcopter, Buy Quality Toys & Hobbies Directly from China Suppliers:Three210 V2 FPV Racing Drone Quadcopter with Betaflight F4 Pro V2 Flight Controller Razer Micro 1200TVL Camera Jumper T Pro TX
Enjoy ✓Free Shipping Worldwide! ✓Limited Time Sale ✓Easy Return.

-
+

Specs

SKU: 1005002984906521 Categories: , Availability:

In stock

4.33

(3 Reviews)

Report Abuse

Description


JMT Three210 V2 RC FPV Racing Drone Quadcopter with Betaflight F4 Pro V2 Flight Controller Foxeer Razer Micro 1200TVL Camera


Functions and features:

210mm wheelbase
Built-in OSD Betaflight
Support BLHeliSuit configuration
Support voltage 3-4S
7-10 minutes of battery life
Remote control distance (with FLYSKY remote control) about 400 meters (with T-PRO remote control) about 2000 meters

Propeller 

Model: 5043
Pitch: 4.3 inches
Material: PC
Weight/G: 4.63G
Inner diameter of center hole: 5mm
Paddle diameter: 13.5mm
Center thickness: 7mm”


ESC 

Current: 35A
Weight: 13g
Size (PCB): 36x36mm
Mounting hole size: 30.5×30.5mm
BLHELI_S J_H_xx firmware
Support 3-6S Lipo input
Built-in current sensor
Dshot600 ready (default) supports PWM/ONESHOT/MULTISHOT/DSHOT


Image transmission:

Weight: 12g
Input voltage range: 7-24V
Frequency: 48CH
Output power: 0mW / 25mW / 100mW / 200mW / 400mW / 600mW switchable
Transmission distance: ≥0.5km25mW, ≥1km200mW, ≥2km600mW
Installation size: 30.5*30.5mm


Motor 

Size: 2205
Stator diameter: 22 mm
Stator height: 5 mm
Motor KV: 2300
Weight: 29g
Support voltage: 3~4S”
Flight control “Name: F4 V2
Size: 36x36mm
Mounting hole: 30.5×30.5mm
STM32 F405 MCU can shorten the cycle time.
Support SBUS / PPM / IBUS receiver mode
Built-in power module BEC


Camera 

Sensor: CMOS 1/3
Lens: 1.8mm
Video format: PAL/NTSC switchable
Resolution: 1200TVL
Input voltage: DC4.5V-25V
Weight: 4.5g
Size: 19×18.7mm(W*L)
White balance: automatic
WDR: 90db


Receiver version 

FRSKY version, FLYSKY version, without receiving version


Note: 

1 Do not charge the battery when you are away from home, do not charge the battery immediately after flying, and do not over-discharge the battery (over-discharge may cause the battery to fail to charge and become useless). The battery cannot be powered off in time after it is fully charged. Charge for a long time.
2. Do not modify any parameters and wiring without knowing the flight control and remote control.
3. Turn on the remote control before powering on the aircraft, unplug the power switch after the flight, and then turn off the remote control to prevent accidents.
4. This product is not a toy and is not suitable for children under 14 years of age.
5. If you are a beginner, it is recommended to be assisted by an experienced adult
6. Novices should pay attention not to take the airplane by hand when the airplane is turning or let children take it to prevent it from being scratched
7. Please turn off the start switch in time when the aircraft falls from a wall or hits other objects during flight, otherwise it may cause damage to the flight control motor, etc. Check whether the aircraft is damaged or the screws are loose, etc. before taking off again when everything is normal.


Q&A:

Please refer to our pictures to select the required kit, all parts are sold separately in our shop, you can add as a spare. If you have any questions, please feel free to contact us.

Additional information

Color

PNP NO Receiver, PNP w Battery, w Flysky RX, w Frsky RX, BNF w FLYSKY Radio, RTF Fs-i6 TX, Full Set FS-i6 FPV, BNF w T-PRO Radio, RTF T-PRO TX, Full Set T-PRO FPV

Subscribe
Notify of
Oldest
Newest Most Voted
Inline Feedbacks
View all comments

Vendor Information

Product Location

 

We have a generous refund policy. If you have purchased from one of our approved vendors on the platform, the best place to start is to request the warranty on your orders page. They may be able to help you with the issue. Please click on the “request warranty” button from your orders page and you would able to raise a warranty request.

If you want to request support from AerialBuz, please request a warranty or further support please email the support team at support@aerialbuz.com

Please select the following reasons while raising an RMA/warranty.

  • Unwanted Item. This covers cases where the customer either changed their mind or received an item that was not part of their order and they feel obliged to return it.
  • Item is defective. This involves items that are broken or simply don’t work upon receipt by the customer.
  • Unauthorised Purchase. This covers cases where someone (oftentimes a child) placed an order on your account.
  • The item was not received by the estimated delivery date. This covers cases where the shipment arrived too late. Customers will usually use this reason when the item was intended for a specific date, such as a birthday.
  • Accidentally ordered the wrong item. This is for when customers meant to make a purchase but mistakenly ordered something else. It also covers items that were bought by mistake, as when the shopper accidentally hits the Buy Now button or forgot to remove it from their cart before checking out.
  • The product is not as described on the website. This is for cases when your website or listing displays something different (usually in color or some other feature) than the one actually shipped to the customer.
  • Any other reasons?

Product Enquiry

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy