Description
Darwin129 7” Long Range PNP is a 7” Quadcopter for long rang. After many attempts and experiments, we have upgrated Darwin129. For example, GPS is changed to M80, the speed of star search is faster and the accuracy is higher, the tail buzzer and 8 high-brightness RGB lights make it is more easier to locate the drone and so on.
-
The motor cable has been changed to silicone cable with sufficient and it won’t melt during soldering.
-
Add battery pad to prevent effectively the battery from slipping off.
-
The VTX antenna is specially designed for long-rang flight, so the transmission distance is much longer.
-
The flight controller supports bluetooth function and can be connect to the mobile phone APP quickly. Make drone tuning much more convenient.
-
VTX transmission power is increased to 800mW, the transmission distance is more longer.
-
The flight controller is installed with silicone dampers, it will reduce effectively the flight controller vibration.
Specification
-
Item name: Darwin129 7” Long Range PNP
-
Wheelbase: 280mm
-
Motor:2507 1800KV 3-5S Brushless Motor
-
Flight Controller: F4 flight controller
-
VTX:5.8G 40CH 800mW VTX TX805
-
Gemfan Flash 7040-3
Flash Durable 3 Blade
7040-Clear 2L2R
Camera upgraded to 1500TVL Darwin B19
Comeswithout battery,charger,receiverorremotecontroller.
25071800KV 3-5S Brushless Motor
Motor KV:1800KV
Idle Current (Io/10V):0.89A
Lipo Cell:3-5S
Weight:39g
Max Continuous Current:42A
Max Continuous Power:840W
Max thrust:1488g(4S/7″)
Configu-ration:12N/14P
Motor Resistance (RM):0.0586 Ω
Stator Diameter:25mm
Stator Thickness:7mm
Motor Diameter:30.8mm
Motor Body Length:20mm
Overall Shaft Length:35mm
Prop adapter shaft:M5
Bolt holes spacing:16mm
Bolt thread:M3
Propeller:7”
4In1 50A Blheli_S ESC
F4-50A stack
Continuous current: 50A
Peak current: 60A (10S)
Lithium battery section number: 2-6S
BEC: 5V2A
ESC weight: 10.8g
Firmware: BL_S
Maximum support throttle signal: DSHOT600
Mounting hole: M3 30.5 * 30.5mm
F4 Flight Controller
Lithium battery section number: 3-6S
BEC: 10V 1A, 4.5V, 3.3V
MCU: STM32F405
Gyro: MPU6000
OSD: AT7456E
Firmware: MATEKF405
Weight: 7.2g
Mounting hole: M3 30.5 * 30.5mm
Support barometer, black box
Bluetooth
5.8G40CH 800mw VTX TX805
Item name: FPV Transmitter VTX
Frequency: 5.8G Channels: 40CH
Input voltage: 7V~24V
5V camera supply: 120mA(MAX)—-25mW@12V 5V
camera supply: 200mA(MAX)—-200mW@12V 5V
camera supply: 300mA(MAX)—-600mW@12V 5V
camera supply: 350mA(MAX)—-800mW@12V Extra
features: Smart audio
Power supply: 5V output for Camera
Output power: 25mW/200mW/600mW/800mW
switchable Antenna connector: MMCX
Cable connector: Solder pads
Dimensions: 36mm*22mm*5mm,30.5 stackable hole
Weight: 8g(excluding antenna)
Package:
1x Darwin129 7” Long Range PNP